Pseudo:

Tout propos injurieux ou à caractère illégal sont interdits. Votre adresse IP est enregistrée afin de pouvoir vous identifier.

1. Rubber engraved signs

2. Engraved signs on copper plates

3. Acrylic acid plate (acrylic) engraved signs

Main material

The main materials for engraving signs are: rubber plates, copper plates, and wood boards. Any board that can be cut with a saw can be used as the main material for engraving signs.

——Aluminum sheet

——AVS board

——Rubber Board

——Pure copper

——Acrylic acid-made panels
The luminous signs made of resin materials have low cost, good quality, strong brightness and low cost. Can make three-dimensional multi-color nesting effect
Compared with blister characters and acrylic characters

⒈Resin signs can be full-body luminous characters, front non-luminous side luminous characters

⒉No need for large-scale equipment such as blister machine, carving machine, etc., reducing production and investment costs

⒊Adjustable and arbitrary color, not fixed several colors

⒋There is little requirement for the production site, 10 square meters are also available

⒌The production of multi-layer color nesting with traditional blister acrylic requires multiple sets of molds, which doubles the cost. The production time and production cost of resin luminous characters multi-layer color nesting and ordinary monochrome luminous signs are the same. Etching: Etching is one of the main methods used in making stainless steel signs.